BioSmart PALMJET

The BioSmart PalmJet reader is designed for non-contact reading of the human palm vein pattern and identifier codes with the subsequent transfer of the received data to the BioSmart UniPass Pro (BioSmart UniPass Pro-EX) controller or BioSmart SmartHub program service.
The BioSmart PalmJet reader is designed to be built into a wall or turnstile. It is mounted in a hole with a diameter of 72 mm and a depth of 45 mm.

Technical Specifications:

• Biometric ID: Palm vein pattern
• Biometric scanner type: Optical, infrared
• Palm distance from scanner: From 4 to 9 cm
• Built-in RFID-reader: Yes
• FAR (False Acceptance Rate) * : 10-5 – 10-8
• Сommunication interface: Ethernet (100BASE-TX IEEE 802.3u)
• Indication: Audible buzzer and RGB LED indicator
• Number of relays: 1
• Relay parameters: DC 12 V 0.75 A
• Output terminal relays contacts: Normally open
• Number of discrete inputs/outputs: 1/1
• Discrete input voltage: From 5 V to 12 V
• Discrete output electrical parameters: DC 12 V 50 mA
• Discrete output type: Open collector
• Power supply: DC 12 V 1 А
• Housing material: Plastic
• Dimensions, mm: 96 x 96 x 60
• Net weight: 350 g
• Operating temperature range: From -40 °С to +35 °С
• Relative humidity at a temperature of 25 °C: Up to 70%
• Ingress protection: IP65

Notes:
*The value FAR = 10-8 was obtained by calculation and corresponds to the False Rejection Rate (FRR) of no more than 1.3% when using a database of 10 000 people.

Palm positioning instructions